Wall Sawing

Wall Sawing is used for cutting horizontal and vertical surfaces, creating precise, clean cuts.

We build and modify our sawing equipment

Meeting the specifications of your sawing project.

Electric Track Mounted Sawing

Track Mounted Sawing is a concrete cutting method typically used to make long, extremely precise vertical and horizontal cuts in reinforced concrete walls and floors for a wide variety of applications that can include openings for doorways and windows, controlled demolition and cutting concrete slabs in confined areas where a floor saw could not operate.

Powered by a 3 phase 415v electrical supply, our track saw can cut concrete and other hard materials with exceptional speed. As a result, track sawing is often the better choice to form large openings when compared with stitch drilling. Cutting with the diamond track saw is much faster and the edges of openings will have a smooth finish.

Whilst track saws are typically used for the cutting of concrete or brick/block walls, track saws can also be put to use on floor slabs and any other flat surfaces where floor sawing may not be an option due to a lack of space to safely maneuver a floor saw or insufficient ventilation that is required when using conventional floor sawing equipment. It is also possible to reduce the width of staircases using diamond track sawing by mounting the track at an angle, running up the stair treads.

As this method of sawing uses a fixed track upon which the sawing motor is mounted, track sawing creates perfectly straight, smooth, clean cuts that cannot be replicated with any other method of concrete cutting.

The track saw is also a very safe tool to handle and operate. Operated by a remote handheld control panel, the operator can stand back a considerable distance from the track saw to eliminate any risks from flying debris etc. To further reduce this risk the track saw is always equipped with a blade guard when cutting.

Whilst cutting through thick areas of concrete to form rectangular openings, the track saw may need to form over cuts in order to fully isolate a section of concrete to be removed. This however can be avoided if necessary, by diamond core drilling holes in each corner to fully release the section to be removed.

If required, water/sediment control can be provided at the request of our clients on all of our services.

We provide Specialist Track Mounted Sawing Services for Local and National Building Contractors, Property Developers, Plumbers, Electricians and Private Individuals from our base in Kunda Park.

We are well placed to serve clients in Sunshine Coast, Caboolture, Gympie, Morayfield and northern Brisbane suburbs, including but not limited to Pelican Waters, Golden Beach, Moffat Beach, Kings Beach, Dicky Beach, Currimundi, Warana, Wurtulla, Bokarina, Kawana, Buddina, Bright Water, Minyama, Mooloolaba, Maroochydore, Buderim, Mountain Creek, Glenfields, Kuluin, Bli Bli, Mudjimba, Marcoola, Coolum, Sunshine Beach, Noosa, Noosa Heads, Palmwoods, Woombye, Nambour, Bli Bli, Diddillibah, Maleny, Montville, Mapleton, Flaxton, Hinterland, Cooroy.

Electric Powered

Using a remote control track mounted saw we are able to cut to depths of 525mm deep as part of our concrete wall sawing services. Flush cutting of floor, walls, and ceilings is available with this equipment. This machinery is electric powered making it suitable for locations where petrol or diesel-powered equipment cannot be used.

Smooth Finish

Unlike other methods of demolition, wall sawing leaves a smooth finish that is ready for installation of door jams, windows, and louvres with no harm to the remaining structure.  Walls can be cut on any angle and to any shape or size. Our blade sizes range from 700mm to 1.4 meters in diameter and have a cutting depth up to 525 mm.

No limitations

Wall Sawing is typically used for creating or enlarging windows and door openings, wall removal and cutting sections of slabs and walls, where handheld saws are limited by depth and cutting speed. Wall saws are used for cutting stairs, large penetrations in concrete structures or inverted cutting.

Message Us

Get In touch below for a FREE no obligation on-site quote.

11 + 13 =

Location

Alexandra Headland